Production - Oilfield automation GEOSTAR-111.DD [Description - Architecture - Features - Supply set - Variants - Software]

Supply set of oilfield automation GEOSTAR-111.DD

Supply set

Controller UIK

UIK controller

Controller for gathering data from transducers, storing, preparing and sending information to the central host by GPRS-connection.

Automatic echo level meter

Automatic echo level meter GEOSTAR

Automatic echo level meter GEOSTAR-112 is mounted on the wellhead pipe. It allows to measure liquid level depth and casing pressure in oil and gas wells.

Specification

  • Registered level range - 8-5000 m
  • Operating pressure range - 1 - 60 bar
  • Operating temperature range -40...+50
  • Interface - RS-232, 485/Modbus RTU

Detailed info >>

Dynamometer GEOSTAR-DDS

Dynamometer GEOSTAR-DDS

Automatic dynamometer is mounted between carrier bars of pumping unit. It measures the dynamometer card and calculate the pump efficiency. The most important device to measure pump filling, production rate and predict malfunctions.

Specification

  • Load range 0-10000, 0-20000 kg
  • Load accuracy - 1 %
  • Consumption - 20 mA
  • Interface - RS-485 (ModBus RTU)

Wellhead pressure gauge GS-AMTU

Wellhead pressure gauge GS-AMTU

Pressure gauge registers the pressure in the point of measurement.

Specification

  • Pressure range 0 - 6(16,25,40,60,100) MPa
  • Pressure accuracy - 0,2 %
  • Operating temperature range -50 .. +140
  • Interface - RS-485 (ModBus RTU)

Detailed info >>

Flowmeter GS-DVU-102.485

Flowmeter GS-DVU-102.485

Flow meter registers the flow in a pipe. General usage is for water injection system.

Specification

  • Flow rate range - 1..25, 2..50, 8..200 m3/hour
  • Flow rate error 0.5-1.0%
  • Interface - RS-485 (ModBus RTU)

All transducers have the protection from environment IP67.

All transducers have the wide temperature range of operation.

All transducers are certified.
Next >>